ros2_rmp/docker-compose.yaml

version: "3.9"

# First network configuration. Change this to the network interface you want to use primarily. (Better configuration for multiple Network interfaces needed).
networks:
  # rmp:
  #   driver: macvlan
  #   driver_opts:
  #     parent: eno1 # robot network interface
  #   ipam:
  #     config:
  #         - subnet: 192.168.0.0/24
  #           gateway: 192.168.0.1
  #           ip_range: 192.168.0.200/25
  #           aux_addresses:
  #             net-address: 192.168.0.100 #? what is this for --> to exclude addresses from buing used.
  # make new bridge network for ros
  rmp:
    driver: bridge
    # ipam:
    #   config:
    #       - subnet:

# add this mountpoint to all services: - ./customize/entrypoint.sh:/entrypoint.sh
# Attention: child services will inherit settings from their parents. So if you set a network_mode: host in the base service, all child services will also use host networking. This is not always what you want. So be careful with this.

services:
  # Base image containing dependencies.
  base:
    image: ghcr.io/bjoernellens1/ros2_rmp/rmp:base
    build:
      context: .
      dockerfile: docker/Dockerfile
      tags:
        - ghcr.io/bjoernellens1/ros2_rmp/rmp:base
      args:
        ROS_DISTRO: humble
      target: base
      x-bake:
        platforms:
          - linux/arm64
          - linux/amd64
    # Interactive shell
    stdin_open: true
    tty: true
    # Networking and IPC for ROS 2
    network_mode: host
    ipc: host
    # Needed to display graphical applications
    environment:
      # Allows graphical programs in the container.
      - DISPLAY=${DISPLAY}
      - QT_X11_NO_MITSHM=1
      - NVIDIA_DRIVER_CAPABILITIES=all
      # set correct ros2 parameters: domain id and rmw implementation
      - ROS_DOMAIN_ID=5
      - RMW_IMPLEMENTATION=rmw_cyclonedds_cpp
      - CYCLONEDDS_URI=file:///cyclonedds.xml
    volumes:
      # Allows graphical programs in the container.
      - /tmp/.X11-unix:/tmp/.X11-unix:rw
      - ${XAUTHORITY:-$HOME/.Xauthority}:/root/.Xauthority
      - ./config/entrypoint.sh:/entrypoint.sh
      - ./config/cyclonedds.xml:/cyclonedds.xml
    restart: unless-stopped

    # networks: # not using bridging anymore, instead try using all services on macvlan? let's see... shoudl word for now. Bridging does definitely not work because multicast is not supported here.
    #   rmp:
    #     #ipv4_address: 192.168.0.101 #actually don't need to set ips. they are set automatically by docker-compose. SHould be inherited by all child services.

  # Overlay image containing the project specific source code.
  overlay:
    extends: base
    image: ghcr.io/bjoernellens1/ros2_rmp/rmp:overlay
    build:
      context: .
      dockerfile: docker/Dockerfile
      tags:
        - ghcr.io/bjoernellens1/ros2_rmp/rmp:overlay
      target: overlay
      x-bake:
        platforms:
          - linux/arm64
          - linux/amd64
    volumes:
      - .:/repo
    command: >
      /bin/bash

  # Additional dependencies for GUI applications
  guis:
    extends: overlay
    image: ghcr.io/bjoernellens1/ros2_rmp/rmp:guis
    build:
      context: .
      dockerfile: docker/Dockerfile
      tags:
        - ghcr.io/bjoernellens1/ros2_rmp/rmp:guis
      target: guis
      x-bake:
        platforms:
          - linux/arm64
          - linux/amd64
    command: >
      /bin/bash
    devices:
      - /dev/dri:/dev/dri

  # Robot State Publisher
  rsp:
    extends: overlay
    command: >
      ros2 launch cps_rmp220_support rsp.launch.py

  # Controller
  controller:
    extends: base
    command: >
      ros2 run segwayrmp SmartCar --ros-args -r cmd_vel:=cmd_vel_out -p serial_full_name:=/dev/segway
    devices:
      - /dev/segway:/dev/ttyUSB0
      #- /dev/ttyUSB0:/dev/ttyUSB0
    privileged: true

  # teleop
  teleop:
    extends: base 
    depends_on:
      - controller
    command: >
      ros2 launch rmp220_teleop robot_joystick.launch.py 
    devices:
      - /dev/input/js0:/dev/input/js0
      #- /dev/input/by-id/usb-Logitech_Wireless_Gamepad_F710_56679674-joystick:/dev/input/by-id/usb-Logitech_Wireless_Gamepad_F710_56679674-joystick
    privileged: true

  # lidar
  lidar:
    extends: overlay
    depends_on:
      - lidar_filter
    command: >
      ros2 launch cps_rmp220_support robot_lidar.launch.py serial_port:=/dev/rplidarA1
    devices:
      - /dev/rplidarA1:/dev/rplidarA1 #udevrules needed for this to work:
#       SUBSYSTEM=="tty", ATTRS{serial}=="0001", SYMLINK+="segway"
# SUBSYSTEM=="tty", ATTRS{serial}=="3453995662b3af4f81f4a69eba5f3f29", SYMLINK+="rplidarA1"

  # Lidar filtering node.
  lidar_filter:
    extends: overlay
    command: >
      ros2 launch cps_rmp220_support robot_scan_filter.launch.py

  # localization by ekf node
  ekf:
    extends: overlay
    depends_on:
      - controller
      - rsp
    command: >
      ros2 launch cps_rmp220_support robot_localization.launch.py

  # mapping
  mapping:
    extends: overlay
    depends_on:
      - ekf
      - rsp
      - lidar
    command: >
      ros2 launch cps_rmp220_support robot_mapping.launch.py

  # slam-toolbox-localization
  localization:
    extends: overlay
    depends_on:
      - ekf
      - rsp
      - lidar
    command: >
      ros2 launch cps_rmp220_support robot_mapping_localization.launch.py map_file_name:=/repo/maps/map.yaml

  # amcl_localization
  amcl:
    extends: overlay
    depends_on:
      - ekf
      - rsp
      - lidar
    command: >
      ros2 launch cps_rmp220_support robot_amcl.launch.py map:=/repo/maps/map.yaml

  # navigation
  navigation:
    extends: overlay
    depends_on:
      - controller
      - teleop
      - rsp
      - lidar
      - ekf
      - oakd
    command: >
      ros2 launch nav2_bringup bringup_launch.py slam:=False map:=/repo/maps/map_01-26-24.yaml use_sim_time:=False use_composition:=True params_file:=/repo/config/nav2_params.yaml
  #maps/map_openlabday.yaml
  # bash
  bash:
    extends: overlay
    command: >
      /bin/bash

  # rviz2
  rviz2:
    #extends: guis
    image: ghcr.io/bjoernellens1/ros2_rmp/rmp:guis
    command: >
      ros2 launch cps_rmp220_support rviz.launch.py
    # Needed to display graphical applications
    privileged: true # really necessary?
    environment:
      # Allows graphical programs in the container.
      - DISPLAY=${DISPLAY}
      - QT_X11_NO_MITSHM=1
      - NVIDIA_DRIVER_CAPABILITIES=all
      - ROS_DOMAIN_ID=5
      - RMW_IMPLEMENTATION=rmw_cyclonedds_cpp
    volumes:
      # Allows graphical programs in the container.
      - /tmp/.X11-unix:/tmp/.X11-unix:rw
      - ${XAUTHORITY:-$HOME/.Xauthority}:/root/.Xauthority
    
  # Foxglove Studio Bridge
  foxglove_bridge:
    extends: overlay
    command: >
      ros2 launch foxglove_bridge foxglove_bridge_launch.xml port:=8765
    #tls:=true certfile:=/certs/foxgloveCert.crt keyfile:=/certs/foxgloveKey.key
    volumes:
      - /opt/cps/certs:/certs

  # Foxglove Studio Webserver
  foxglove:
    image: ghcr.io/foxglove/studio:latest
    stdin_open: true
    tty: true
    # Networking
    network_mode: bridge
    ports:
      - 8080:8080
    depends_on:
      - foxglove_bridge
    volumes:
      - ./foxglove/default.json:/foxglove/default-layout.json

  # USB Camera Stream
  cam:
    extends: overlay
    command: >
      ros2 run ros2_cam_openCV cam_node
    devices:
      - /dev/video0:/dev/video0


  # ROS2 Frontier exploration
  explorer:
    extends: overlay
    depends_on:
      - controller
      - teleop
      - rsp
      - lidar
      - ekf
      - navigation
    command: >
      ros2 launch cps_rmp220_support robot_exploration.launch.py

  ### Images for ROS1 Interactions
  #ROS1 Bridge
  ros1bridge:
    image: ghcr.io/bjoernellens1/ros2_rmp/ros1bridge
    command: >
      ros2 run ros1_bridge dynamic_bridge --bridge-all-2to1-topics
    build:
      context: .
      dockerfile: docker/Dockerfile
      tags:
        - ghcr.io/bjoernellens1/ros2_rmp/ros1bridge
      args:
        ROS_DISTRO: humble
      target: bridge
      x-bake:
        platforms:
          #- linux/arm64
          - linux/amd64
      # Networking and IPC for ROS 2
    network_mode: host
    ipc: host
    environment:
      - ROS_DOMAIN_ID=5
      - RMW_IMPLEMENTATION=rmw_cyclonedds_cpp
      - ROS_MASTER_URI=http://localhost:11311 # is configured to run roscore on the robot but could change to local ros1 machine here
  
  #ROS1 roscore
  roscore:
    command: >
      roscore
    extends: ros1bridge
    network_mode: host
    ipc: host
    environment:
      - ROS_DOMAIN_ID=5
      - RMW_IMPLEMENTATION=rmw_cyclonedds_cpp
      - ROS_MASTER_URI=http://localhost:11311 # is configured to run roscore on the robot but could change to local ros1 machine here

## Configure on ROS1 Hosts
# seggy 192.168.0.100
#     locally running ros-package: control1 
#          subscribing topic2
#          publishing  topic1                 

# robot2 192.168.x.x
#     locally running ros-package: control2
#          subscribing topic1
#          publishing  topic2
# As we need one ros-master to control the communication, we choose 192.168.1.1 as master. Therefore we execute locally on robot 1:

# export ROS_MASTER_URI=http://192.168.0.100:11311 # or localhost?
# export ROS_HOSTNAME=192.168.0.100
# export ROS_IP=192.168.0.100   
# roscore

# In order to connect to the ROS-master, we execute locally on robot2:

# export ROS_MASTER_URI=http://192.168.0.100:11311            
# export ROS_IP=192.168.0.?                               
# export ROS_HOSTNAME=192.168.1.?

  # ROS2 oak-d-lite camera
  oakd:
    extends: overlay
    command: >
      ros2 launch depthai_examples stereo.launch.py
    #devices:
      #- /dev/oakd-lite:/dev/oakd-lite # need corresponding udevrules for this to work:
# SUBSYSTEM=="usb", ATTRS{idVendor}=="03e7", MODE="0666", SYMLINK+="oakd-lite"
      #- /dev/:/dev/ 
    device_cgroup_rules:
      - 'c 189:* rmw'
    volumes:
      - /dev/bus/usb:/dev/bus/usb

  # for testing the oak-d-lite camera -> works now with cgroup rules
  depthai:
    image: luxonis/depthai:latest
    command: >
      python3 /depthai/depthai_demo.py
    stdin_open: true
    tty: true
    device_cgroup_rules:
      - 'c 189:* rmw'
    volumes:
      - /dev/bus/usb:/dev/bus/usb
    environment:
      - DISPLAY=${DISPLAY}
      - QT_X11_NO_MITSHM=1
      - NVIDIA_DRIVER_CAPABILITIES=all
  
  zerotier:
    image: "zyclonite/zerotier:router"
    container_name: zerotier-one
    devices:
      - /dev/net/tun
    network_mode: host
    volumes:
      - '/var/lib/zerotier-one:/var/lib/zerotier-one'
    cap_add:
      - NET_ADMIN
      - SYS_ADMIN
      - NET_RAW
    restart: unless-stopped
    environment:
      - TZ=Europe/Amsterdam
      - PUID=1000
      - PGID=1000
      - ZEROTIER_ONE_LOCAL_PHYS=enp5s0 wlx00e04c5513fc # change for actual interfaces
      - ZEROTIER_ONE_USE_IPTABLES_NFT=false
      - ZEROTIER_ONE_GATEWAY_MODE=inbound # might change to both ways
      #- ZEROTIER_ONE_NETWORK_IDS= # does not really do much?