Only change was to remove the Store-Link-Bus combinations for
batteries and H2 storage from PyPSA-Eur, since they are implemented
with different names, costs and voltage level in PyPSA-Eur-Sec.
Removals are now done in a more transparent way in the config.yaml.
The assumptions for c_b and c_v and eta were arranged assuming
extraction plants (like the coal CHP in DEA).
However, if you look in DEA assumptions at "09b Wood Pellets Medium"
(used for solid biomass CHP) and "Gas turbine simple cycle (large)"
(used for gas CHP) they are not extraction plants but back pressure
plants.
The back pressure coefficient in DEA c_b is simply
c_b = name plate electricity efficiency / name plate heat efficiency
both measured when both heat and electricity are produced at maximum.
For the extraction plants, the efficiency was measured in condensation
mode, i.e. no heat production.
In almost 99.5% of cases the CHP dispatches along the backpressure
line where heat output is proportional to electricity output.
So we can switch to a single link to avoid the burden of modelling the
full electricity-heat feasibility space of CHPs.
This only applies to large CHPs in district heating networks.
Specify as dictionary, use get_parameter to get correct value.
Also remove old parameter "space_heating_fraction" since this is
superceded by the new exogenous retro code.
Strategy is too keep as much of configuration in config.yaml as
possible.
We also aim to allow exogenous investment-year-dependent
configurations to be done in a similar manner (e.g. share of district
heating or FCEV transport).
Since today's industrial electricity demand is distributed by
population and GDP, subtract this from the regular electricity demand
(which already has space/water heating subtracted).
Now regular electricity demand is only non-heating electricity demand
in residential and tertiary sectors.
Add back new industry electricity demand at the correct locations, as
determined using the hotmaps database.
I.e. when the generators are clustered to the "simplified" network
resolution, but the grid is clustered further, e.g. by using the
clusters = 37m "m" option.
I.e. when the generators are clustered to the "simplified" network
resolution, but the grid is clustered further, e.g. by using the
clusters = 37m "m" option.
Rather than taking a mean of the clustered connection costs.
Apply cost update also for overnight scenarios based on planning year.
Add land costs for onshore wind.
- add_brownfield.py: Have to make sure that for each CHP there is both
a heat and electric link, but they have different p_nom for each
CHP, so have to make sure we don't remove one without the other.
- solve_network.py: Make sure extra_functionality constraints for CHP
power-heat feasibility graph also work for non-extendable CHPs.
In order to calculate connection costs, average values for underground_fraction and average_distance are calculated for all the buses in the initial network mapped to the clustered network.
Previously they were distributed only by country to the first node in
the country.
Now conventional power plants are assigned to the correct node using
the bus map from PyPSA-Eur.
Wind and solar are distributed in each country by capacity factor.
The code has been refactored and a bug was fixed whereby total
capacities of wind and solar in each country were not correct.
Now the years in the config.yaml for myopic are integers not strings.
In prepare_costs, you need the min_count=1 in the sum so that it
generates NaNs for missing data (rather than 0) so that NaNs can be
subsituted by .fillna in the next line. Otherwise many values
(discount rates and efficiencies for solar, wind) are set to zero.
Also added carriers, storage and generators for coal, nuclear and
oil. (This needs to be organized better soon so that the carriers are
defined in config.yaml.)
