mirror of
https://github.com/bjoernellens1/cps_loki_bringup.git
synced 2024-11-22 23:53:48 +00:00
92 lines
3.6 KiB
YAML
92 lines
3.6 KiB
YAML
controller_manager:
|
|
ros__parameters:
|
|
update_rate: 30 # Hz was 100 vefore
|
|
|
|
joint_state_broadcaster:
|
|
type: joint_state_broadcaster/JointStateBroadcaster
|
|
|
|
diffbot_base_controller:
|
|
type: diff_drive_controller/DiffDriveController
|
|
|
|
diffbot_base_controller:
|
|
ros__parameters:
|
|
# left_wheel_names: ["left_wheel_joint"]
|
|
# right_wheel_names: ["right_wheel_joint"]
|
|
|
|
right_wheel_names: ["left_wheel_joint"] # needed to switch names because motors are connected to the wrong slots
|
|
left_wheel_names: ["right_wheel_joint"]
|
|
|
|
wheel_separation: 0.28
|
|
#wheels_per_side: 1 # actually 2, but both are controlled by 1 signal
|
|
wheel_radius: 0.065
|
|
|
|
wheel_separation_multiplier: 1.0
|
|
left_wheel_radius_multiplier: -1.0
|
|
right_wheel_radius_multiplier: 1.0
|
|
|
|
publish_rate: 50.0 # was 100 before
|
|
odom_frame_id: odom
|
|
base_frame_id: base_link
|
|
# pose_covariance_diagonal : [0.001, 0.001, 0.001, 0.001, 0.001, 0.01]
|
|
# twist_covariance_diagonal: [0.001, 0.001, 0.001, 0.001, 0.001, 0.01]
|
|
# pose_covariance_diagonal:
|
|
# [0.001, 0.001, 1000000.0, 1000000.0, 1000000.0, 1000.0]
|
|
# twist_covariance_diagonal:
|
|
# [0.001, 0.001, 1000000.0, 1000000.0, 1000000.0, 1000.0] # changed from https://github.com/kallaspriit/rosbot/blob/main/ros/src/rosbot_description/config/diff_drive_controller.yaml
|
|
|
|
# Updated covariance matrix to small values on the diagonal axis for package ros_localization. This is recommended for diffdrive rorbots.
|
|
pose_covariance_diagonal : [0.0001, 0.0001, 0.0001, 0.0001, 0.0001, 0.0001]
|
|
twist_covariance_diagonal: [0.0001, 0.0001, 0.0001, 0.0001, 0.0001, 0.0001]
|
|
|
|
open_loop: false
|
|
#enable_odom_tf: true #disabled because tf will be handled by robot_localizaion node in the future (imu sensor fusion)
|
|
|
|
cmd_vel_timeout: 0.1
|
|
#publish_limited_velocity: true
|
|
use_stamped_vel: false
|
|
velocity_rolling_window_size: 10 # changed from https://github.com/kallaspriit/rosbot/blob/main/ros/src/rosbot_description/config/diff_drive_controller.yaml
|
|
|
|
# preserve turning radius when limiting speed/acceleration/jerk
|
|
preserve_turning_radius: false # changed from https://github.com/kallaspriit/rosbot/blob/main/ros/src/rosbot_description/config/diff_drive_controller.yaml
|
|
|
|
# Velocity and acceleration limits
|
|
# Whenever a min_* is unspecified, default to -max_*
|
|
# linear.x.has_velocity_limits: false
|
|
# linear.x.has_acceleration_limits: false
|
|
# linear.x.has_jerk_limits: false
|
|
# linear.x.max_velocity: 2.0
|
|
# linear.x.min_velocity: -2.0
|
|
# linear.x.max_acceleration: 5.0
|
|
# linear.x.max_jerk: 0.0
|
|
# linear.x.min_jerk: 0.0
|
|
|
|
# angular.z.has_velocity_limits: false
|
|
# angular.z.has_acceleration_limits: false
|
|
# angular.z.has_jerk_limits: false
|
|
# angular.z.max_velocity: 5.0
|
|
# angular.z.min_velocity: -5.0
|
|
# angular.z.max_acceleration: 10.0
|
|
# angular.z.min_acceleration: -10.0
|
|
# angular.z.max_jerk: 0.0
|
|
# angular.z.min_jerk: 0.0
|
|
|
|
linear.x.has_velocity_limits: true
|
|
linear.x.has_acceleration_limits: false
|
|
linear.x.has_jerk_limits: false
|
|
linear.x.max_velocity: 2.0
|
|
linear.x.min_velocity: -2.0
|
|
linear.x.min_acceleration: -5.0
|
|
linear.x.max_acceleration: 5.0
|
|
linear.x.max_jerk: 0.0
|
|
linear.x.min_jerk: 0.0
|
|
|
|
angular.z.has_velocity_limits: true
|
|
angular.z.has_acceleration_limits: true
|
|
angular.z.has_jerk_limits: false
|
|
angular.z.max_velocity: 6.28
|
|
angular.z.min_velocity: -6.28
|
|
angular.z.max_acceleration: 25.0
|
|
angular.z.min_acceleration: -25.0
|
|
angular.z.max_jerk: 0.0
|
|
angular.z.min_jerk: 0.0
|