bjoern/pypsa-eur
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
4,065 Commits 1 Branch 0 Tags 133 MiB
e933acd9e8
Commit Graph

4065 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Fabian Neumann
aa34e0406f more config tables descriptions 2019-08-08 12:06:51 +02:00
Tom Brown
8d68146e7c Switch to BDEW-based weekday/end space heating demand profiles 
These are different for residential and services demand.

Also include Snakefile in config files copied for each run.

Use gurobi settings from gurobi support for speed.

Commented out settings for testing randomness for noise.
 2019-08-07 19:08:06 +02:00
Fabian Neumann
6aa6b20e26 more config tables and fixed table widths 2019-08-07 17:58:28 +02:00
Tom Brown
019e2f3f25 Split heat demand into residential and services with diff profiles 
All urban central (i.e. district heating) is aggregated to the same
profile and bus.

The code is now written to cycle over each heating sector to add
demand and supply technologies, only changing what is necessary to
change, rather than just copying chunks of code and modifying
parameters there. This should make it easier to get an overview of
what's going on.
 2019-08-07 11:33:29 +02:00
Fabian Neumann
7a4e9f22d4 configuration table descriptions 2019-08-07 10:56:23 +02:00
Fabian Neumann
45d67c1158 wip on installation and introduction 2019-08-06 16:53:32 +02:00
Tom Brown
eebac1bfa3 Deduct electric heating from electricity load profile 
Otherwise it is double-counted in both the heating and the electricity
load profiles. This removes 454 TWh/a from electricity.
 2019-08-01 16:16:05 +02:00
Tom Brown
d3a0f7e67d Diff intraday heat profiles for (res, services) x (water, space) 
These are specified in data/heat_load_profile.csv.

The resulting heat_demand df has MultiIndex columns, where the first
level is ["sector use"], and the second level level is nodes.
 2019-08-01 15:43:04 +02:00
Tom Brown
72b7ea0997 Allow space heating to be linearly reduced (without cost so far) 2019-07-31 14:22:33 +02:00
Tom Brown
886b7c5f48 Include micro-CHP using PEMFC 2019-07-28 13:10:21 +02:00
Jonas Hoersch
07143fb2cd base_network: Zero s_nom of under_construction lines 2019-07-26 11:43:34 +02:00
Tom Brown
318444e3a4 Include new industry technologies for plotting colours 2019-07-21 12:11:40 +02:00
Tom Brown
7e37dbbd03 Include multi-link outputs in energy balance 2019-07-21 12:11:05 +02:00
Tom Brown
ae1ea81520 Copper plate biogas and solid biomass 
Because there was insufficient solid biomass in 3-4 countries to
supply industry for it locally, and we need to account for transport
of solid biomass.

Should be replaced by transport cost links between countries.
 2019-07-21 12:09:18 +02:00
Tom Brown
32af25df62 Backup config files before solve_network rather than after 
For debugging cases where solving failed.
 2019-07-20 10:55:23 +02:00
Tom Brown
232425ac61 Add Energy Balances 2018 to data bundle (used for industry demand) 2019-07-19 12:56:38 +02:00
Tom Brown
03670c1ab3 Simplify industry load-link-bus to avoid numerical problems 
Gurobi had numerical problems solving the system.

Trivial load-link-bus combinations to manage CO2 have been replaced
with simple loads.
 2019-07-19 12:10:22 +02:00
Tom Brown
06cb526fef Re-integrate industry, aviation and shipping into model 
Following plan by Marta and Kun
 2019-07-19 10:21:12 +02:00
Tom Brown
990ab035c3 Include light-rail and high-speed-rail in "electricity rail" 
This then conforms with JRC IDEES totals
 2019-07-19 10:19:21 +02:00
Tom Brown
7509d61348 Split industrial demand across nodes by population 2019-07-18 15:55:58 +02:00
Tom Brown
b132193f7f Read in more sector detail for road, rail, aviation and navigation 2019-07-18 15:38:37 +02:00
Tom Brown
f3b6027cd5 Incorporate Marta and Kun's scripts to build industry demand 
By country and by energy source.
 2019-07-18 11:40:38 +02:00
Tom Brown
ddca9afcc7 Give all loads a carrier; rename heat buses; fix district h losses 
Heat buses renamed to:

rural (for low-density areas where district heating not possible)

urban decentral (for high-density areas without district heating and
individual heating technologies) (used to be called "urban")

urban central (for high-density areas with district heating) (used to
be called "central")

District heating losses applied only to urban central.
 2019-07-16 16:00:21 +02:00
Tom Brown
6cc676d6cf 190516: Try removing H2 network too 2019-07-12 08:51:25 +02:00
Fabian Neumann
7ef5146393 outline for rules overview 2019-06-19 13:12:02 +02:00
Fabian Neumann
2979b89291 Merge remote-tracking branch 'upstream/master' into solve_network 2019-06-18 13:48:52 +02:00
Fabian Neumann
5119a73477 merge upstream/master in co2limit 2019-06-18 13:33:01 +02:00
Fabian Neumann
dc1feadcba generalize solve_network 
* skip_iterating flag: solve network only once without updating impedances
* extra_functionality parameter: add function to modify pyomo model
* extra_functionality args: function arguments for extra_functionality
* extra_postprocessing: add function for postprocessing steps depending on n.model
 2019-06-18 13:24:29 +02:00
Jeroen Peters
97985e3c52 Fix by changing po.Constraint.Skip into pypsa.opt.Constraint.Skip 2019-06-18 13:18:59 +02:00
Jonas Hörsch
ac32f2cad6 Fix typo introduced in previous commit 2019-06-18 13:18:59 +02:00
Jonas Hörsch
ffe7cf7db2 agg_p_nom_min_max.csv: Skip unconstrained values 2019-06-18 13:18:59 +02:00
Jonas Hörsch
2f728b33c8 solve_network: Move country/carrier constraints to opts as CCL 2019-06-18 13:18:59 +02:00
Jonas Hörsch
d7fcbbba7b solve_network: Backwards compatibility 
Make sure not providing a csv-file with capacity limits does not break.
 2019-06-18 13:18:59 +02:00
Jeroen Peters
a2c736e2bf Include config handle 2019-06-18 13:18:59 +02:00
Jeroen Peters
504a9fd595 Add handle for limits 2019-06-18 13:18:59 +02:00
Jeroen Peters
c065cad811 Fix missing code 2019-06-18 13:18:59 +02:00
Jeroen Peters
c1f79c4275 agg_p_nom_minmax.csv: add csv with minmax values 2019-06-18 13:18:59 +02:00
Jeroen Peters
f68f4c4205 solve_network.py: add minmax constraint per country 2019-06-18 13:18:59 +02:00
Fabian Neumann
c99480e0f3 add co2 emissions reduction factor to wildcard 2019-06-18 11:50:54 +02:00
Fabian Neumann
85631baf99 doc: local path to doc/img 2019-06-07 11:08:31 +02:00
Fabian Neumann
9bc702bc07 doc: move img folder into doc 2019-06-07 11:07:12 +02:00
Fabian Neumann
362f183c32 doc: add frame for documentation 2019-06-07 10:34:36 +02:00
Fabian Neumann
4820588d6b README: remove bug note 2019-06-06 11:30:00 +02:00
Fabian Neumann
fba1f6c73b add instructions to delete tar.xz and add natura.tiff from command line (#45) 
* README: add instructions to delete tar.xz and add natura.tiff from command line

* README: minor syntax fix
 2019-06-06 11:22:19 +02:00
Jonas Hoersch
5de59fe453 base_network: Replace deprecated yaml.load by yaml.safe_load 
Refer to https://msg.pyyaml.org/load for details.
 2019-06-05 18:07:36 +02:00
Fabian Neumann
4056ad7ad8 environment.yaml: install pypsa and dependencies through conda-forge (#44) 
* environment.yaml: install pypsa and dependencies through conda-forge

* environment.yaml: remove rasterstats + restore memory_profiler
 2019-06-05 14:14:37 +02:00
Jonas Hoersch
63a6cebab2 build_renewable_profiles: Communicate extent as pickleable tuple (fixes #42) 2019-05-28 13:50:42 +02:00
Jonas Hoersch
97eaebb0ea environment.yaml: Separate dependencies of pip packages more cleanly 
Dependencies are either of atlite, pypsa or the workflow itself.

Use snakemake-minimal instead of snakemake (fixes #39)
 2019-05-26 10:24:42 +02:00
Jonas Hoersch
25923d6a40 README: Add link to pre-computed natura raster 2019-05-24 15:07:48 +02:00
Jonas Hoersch
8a9248ee15 Update dependencies for new pypsa version 2019-05-24 13:59:45 +02:00